Inspired MK Design patch

This charming black circle designer inspired patch is all the rave. Pick yourself up one or two or even three and design your heart away.

Perfect for adding personality to jackets, Tote bags, backpacks, journals, shoes or apparel. 

Application Instructions:

Using a house Iron:
*********Avoid steam by making sure there is no water in the iron.********

Heat Preparation: Set your iron to the cotton setting, approximately 350°F, for optimal results.

Fabric Compatibility: Ensure the garment or item you’re applying the patch to can endure the application
temperature. Perform a heat test beforehand. We cannot be held responsible for damage caused by unsuitable fabric or incorrect application methods.

Moisture Removal: Preheat the application area by ironing it for five minutes. This step helps remove any moisture from the garment, ensuring better adhesion.

Protection Layer: Place a protective cloth over the patch before ironing. Avoid ironing directly on the patch.

Secure Application: Press down firmly on the patch with the iron for 30–45 seconds. If preferred, you may sew the patch in place instead of ironing.

Final Seal: Allow the patch to cool, then turn the garment inside out and iron the reverse side for an additional 30 seconds to secure the bond.

Heat Press: (heat press temp may vary)
1) Set your heat press between 315F - 350 F
2) Place patch on desired location of garment and cover with a protective covering or a Teflon sheet to protect the patch from damage.
3) Press for 15-20 seconds
4) Turn the garment over and press the other side for an additional 7-10 seconds
5) Let your item cool